Control panel with display for one or two 24V electromechanical operators used on 230V swing gates. There are two power modules, which are interchangeable and can operate all motors. The radio receiver is incorporated and the memory of the remote controls is removable and expandable. It has an anti-crushing system based on D-Track technology, it controls the slowing down when opening and closing and has an electronic self-learning function. The main functions include automatic closing, fast closing, partial opening and hold-to-run operation. This panel can be programmed using Bluetooth or remotely via wifi/GSM using a dedicated app. The product complies with the new energy efficiency regulations and therefore has a power consumption on standby of less than 0.5 W.

Control panel with trimmer and dip switch for one operator, 230V - 70W.

Control panel with display for one operator, 24V - 70W.

Control panel with dip switches and potentiometers for one or two 230V/500W operators used on sliding and swing gates, shutters and overhead doors with the management of up to two sensitive edges (one of which type 8K2). The dual-channel radio receiver is incorporated. With the potentiometers, we can manage not only the automatic closing time but also the strength of the gates and slowing down time. Functions include the pedestrian opening (only remote controlled), fast closing and the pulse blocking function. The detection of faults is done via LED.

Control panel with dip switches and potentiometers for one or two 24V electromechanical operators for 230V/80W swing gates. The dual-channel radio receiver is incorporated. The torque is electronically adjusted with an obstacle detection system. The strength of the gates and slowing down space can be adjusted with the potentiometers. Key functions include automatic closing, fast closing, pulse locking when opening and pressure surge when opening. It supports the EELINK protocol.

Control panel wit display for a 230V/750W operator used on sliding gates, industrial sectional doors and automatic barriers, with obstacle detection function achievable with sensitive edge or BFT encoder. The command inputs can be configured, the radio receiver has rolling code technology incorporated into it and the terminal boards are coloured and can be removed to make it easier to perform the wiring.

Control panel with display for one or two 230V used on electromechanical or hydraulic parking bollards. It can deal with up to four bollards simultaneously (or two in the case of the Xpass 1200 models) and has configurable outputs and a connector for a 433 MHz radio receiver with optional 2048 code memory.

Control panel with display for one or two 24V electromechanical operators used on 230V/500W swing gates (Power version). The dual-channel radio receiver is incorporated. It has a crush-proof system based on D-Track technology, controls the slowing down when opening and closing and has an electronic self-learning function. The main functions include automatic closing, fast closing, partial opening and hold-to-run operation.

Powerful, robust operators with 400V three-phase power supply designed specifically for large, heavy gates. The heavy structure of the gear motor, the painted galvanised steel casing and the on-board control unit make it the ideal solution for all industrial situations where reliability and power are essential.